How to Drill Through Tile 

How to Drill Through Tile

The first step in drilling through the tile is to mark the hole on the tile. This will help you drill through the tile without damaging it. Next, use a drill bit of the proper size to drill through the tile. The bit should be at a moderate speed to prevent it from overheating. Hold the drill steady with a free hand. Read the BDL Shopping Center guide on how to drill through tile. 

Multi-material Drill Bit 

A multi-material drill bit is best for drilling through tile. It will clear away the material that is behind the tile. This ensures that the fixing plug sits flush with the tile, providing a secure fixing. Also, this makes the project more aesthetically pleasing. It’s also important to drill shallow holes before drilling through the tile. 

BDL Shopping Center | BDL Shop | BDL | Shopping Malls Canada
Beautiful still life of spiral fluted tool with sharp metal cutters. Rebar resistant. Drilling holes in hard building materials

Masonry Drill Bit 

If the wall is made of brick or concrete, you’ll need to use a masonry drill bit. If the tile is made of wood or a cement board, you can use a wood drill bit. Remember to use new drill bits when drilling through tile, since old ones can damage the tile. 

Use Protective Gear 

When drilling tile, it’s important to wear the proper protective gear. You should wear protective goggles, gloves, and a respirator. This is because the drill will release dust that could cause damage to your eyes or nose. The drill bit should also be lubricated with water. A drill guide may also be useful. 

Check for Cracks  

Before drilling, you should clean and inspect the tile for cracks. If it is found that the tile is defective, you’ll need to replace it. Then, use a whiteboard marker to mark the spot where you want to drill. You can also apply masking tape to increase the grip on the drill bit. 

Another important tip for drilling through is to make sure that the drill bit is the right one for the type. It should be slow enough to drill through the tile without creating vibrations. If you drill at too fast a speed, you can cause the tile to crack. You can avoid this by choosing a drill bit with a slow speed. 

BDL Shopping Center | BDL Shop | BDL | Shopping Malls Canada
Removing old tiles. Jackhammer – drilling demolition hammer on the tile

Control the Temperature of Drill 

When drilling through tile, it’s essential to keep the drill bit cool. As it drills through the tile, it gets very hot and can cause the tile to crack. If you don’t want to risk overheating your drill bit, you can use a wet sponge to cool it down before continuing the drilling process. The sponge will also help in cleaning up the tile dust. 

To drill through the tile, you will need a power drill. When drilling, you should use carbide or diamond-tip drill bits. Avoid the use of regular twist drill bits. They are not suitable for drilling through natural granite or ceramic tiles. Also, don’t forget to measure the holes accurately to ensure that you don’t miss anything. Follow BDL Shopping Center on Facebook, TikTok, and Instagram. Here is the website: BDL Shop 

Back to list

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *